What’s the Story Behind a 4 mm Apollo 12 Moon Rock? SIMS Helps Solve the Mystery

How do scientific investigators determine the age and origin of a lunar basalt when the Pb-bearing phases needed to reconstruct its history occur as tiny, complex intergrowths within the rock?

Grain Boundary Segregation

A 2026 study revisited Apollo 12 basalt sample 12032,366-18, an unusual basalt whose mineralogy, chemistry, and previously measured thermal history left key questions unresolved. Researchers still needed to establish when it crystallized and determine where it originated.

 

To investigate, researchers used in situ Pb isotope analysis with a CAMECA IMS 1280 at the NordSIMS facility in the Department of Geosciences of the Swedish Museum of Natural History (Stockholm, Sweden). By targeting Pb-bearing phosphate grains within their petrographic context, the team could examine features that conventional bulk techniques could not address.

 

Why This Tiny Basalt Was Difficult to Date

Sample 12032,366-18 is only about 4 mm across and weighs approximately 41 mg. Its mineralogy and chemistry distinguish it from the main Apollo 12 basalt groups.

 

Previous ⁴⁰Ar/³⁹Ar analysis had revealed a complex thermal history but produced only a poorly constrained minimum crystallization age of about 2.3 billion years. Researchers needed a better way to constrain when the basalt formed.

 

Of particular importance were Pb-bearing phosphate grains preserved within the mesostasis and closely intergrown with K-feldspar. SIMS allowed these complex intergrowths to be analyzed in situ, retaining their relationship to the surrounding mineralogy and directly linking the isotopic ages to the basalt’s crystallization history.

 

With an approximately 20 µm spot size, the CAMECA IMS 1280 simultaneously measured ²⁰⁴Pb, ²⁰⁶Pb, ²⁰⁷Pb, and ²⁰⁸Pb from selected areas within the polished sample.

 

Pinning Down the Basalt’s Age

Measurements from different mineral phases were used to construct a Pb-Pb isochron, yielding a well-constrained crystallization age of about 3.4 billion years.

 

FIGURE: ²⁰⁷Pb/²⁰⁶Pb versus ²⁰⁴Pb/²⁰⁶Pb diagram for SIMS analyses of 12032,366-18. The dark blue dashed line represents the isochron; gray symbols represent excluded analyses due to terrestrial contamination. The regression yields a crystallization age of 3400 ± 16 Ma (2σ). Error bars are 2σ. — Source: Deligny et al., Meteoritics & Planetary Science (2026).

Analysis workflow

That age predates the main Apollo 12 basalt groups, which crystallized between approximately 3.1 and 3.3 billion years ago.

 

The researchers note that 12032,366-18 is the only known lunar sample among Apollo, Luna, and Chang’e returned samples and meteorite collections with a crystallization age of approximately 3.4 billion years. 

 

“SIMS was essential for this study because it allowed us to perform in situ Pb analyses of phosphate grains preserved within the mesostasis and intimately intergrown with K-feldspar. These analyses maintained the petrographic context of the minerals, enabling us to directly link the isotopic ages to the crystallization history of the basalt. The high spatial resolution and sensitivity of the CAMECA LG-SIMS were critical for targeting these complex intergrowths and obtaining robust age constraints from features that could not have been analyzed using conventional bulk techniques.” — Cecile Deligny, Post-doctoral Researcher at Open University, United Kingdom

Tracing the Basalt’s Possible Origin


The Pb isotope data revealed another important difference: the sample’s initial Pb isotopic ratios plot separately from those of other Apollo 12 basalts.

 

They also plot below the expected mixing line between KREEP and low-µ mantle reservoirs, indicating that the source cannot be explained by simple binary mixing between these two endmembers.

 

Together with the sample’s chemical characteristics, the results support the conclusion that 12032,366-18 was not indigenous to the Apollo 12 landing site.

 

Western Oceanus Procellarum is considered the most plausible source region. One possible origin is the area around Kepler crater, approximately 550 km northwest of the Apollo 12 site.

 

The sample contains approximately 7 ppm thorium, overlapping with remotely sensed values of approximately 5–8 ppm in western Oceanus Procellarum and reinforcing the possibility that it originated in this region.

 

Why In Situ SIMS Mattered


Understanding the Pb isotope data depended on measuring the Pb-bearing minerals in place, within their complex intergrowths, while preserving the petrographic context needed to interpret the results.

 

CAMECA LG-SIMS provided the spatial resolution and sensitivity to do that. By targeting these features in situ, researchers could directly connect the Pb isotope ages with the basalt’s crystallization history, something conventional bulk techniques could not provide for these features.

 

For a 4 mm Apollo 12 moon rock, SIMS helped reveal a story stretching back about 3.4 billion years and new clues about where on the Moon it may have originated.

 

Jacob Mack
About Cécile Deligny

Cécile Deligny, Post-doctoral Researcher at Open University, United Kingdom and at Swedish Museum of Natural History, Sweden

Instrument Notes

The Apollo 12 study described above was performed using a CAMECA IMS 1280. The IMS 1300-HR³ is CAMECA’s newest large-geometry ion microprobe, designed for a wide range of geoscience applications, including tracking geological processes using stable isotopes, dating minerals, and determining the presence and distribution of trace elements. Its high sensitivity and high lateral resolution make it well suited to planetary geoscience research involving microanalytical isotope measurements and geochronology. 

 

For More Information

Read the scientific article: C. Deligny, M.J. Whitehouse, R.E. Merle, H. Jeon, A.A. Nemchin, B.L. Jolliff, “Impact provenance and age of a unique basalt found in Apollo 12 regolith,” Meteoritics & Planetary Science (2026), doi: https://doi.org/10.1111/maps.70204.

 

 

Illustration of a girl taking CAMECA e-learning training programs

Learn from Experts

We offer training for all instruments and experience levels, available online or at your lab. CAMECA accelerates your learning curve!